TriboDyn 15W-40 Synthetic Blend Heavy Duty Engine Oil
TriboDyn® Patented 15W-40 CK-4 Synthetic Blend Heavy Duty Engine Oil is a multi-purpose lubricant designed for service in Automotive, Industrial, & Heavy-Duty engine applications, performs under the highest levels of extreme pressure, heat & stress. Is recommended for use in all street, truck & off-road vehicles, including all forms of High-Performance Racing, powerboats and other stationary & mobile equipment, both newer & older engines, as well as L.P.G & natural gas engines. Specifically designed for today’s high-performance diesel engines, including diesel with oil fired injectors and turbocharged engines, low-emissions diesel engines equipped with Exhaust Gas Recirculation (EGR) & Diesel Particulate Filters using Ultra-Low Sulfur Diesel Fuel (ULSD) and Low Sulfur Diesel (LSD). Keeps diesel engines & pistons clean & soot suspended in oil despite longer drain intervals & increased soot loading.
TriboDyn® Patented Synthetic Blend Heavy Duty Engine Oils are highly refined paraffinic and superior synthetic base oils formulated into a complex mixture of extreme pressure lubricants combined with a “High Performance Coating Technology” that is engineered to maximize fuel efficiency, minimize friction & wear, increase part & engine life, reduce operating temperature and perform under extreme pressure & heat. This unique formula also provides continuous protection by dispersing & clinging to critical areas without creating any drag, providing both start-up and continuous benefits while protecting against corrosion. The proprietary technology is an “Intelligent” material that is attracted to areas of heat and friction, as pressures increase with RPM or load, the special lubricants combined with the active “Coating” technology in the oil can form a self-lubricating “Ceramic” film in high load & heat areas, providing critical protection that actively seeks out areas needing increased lubrication, and at times not simply reduce or eliminate wear, but can also repair damaged surfaces.
Applications: TriboDyn® Patented 15W-40 CK-4 Synthetic Blend Heavy Duty Engine Oil meets or exceeds the following service classifications: API: CK-4, CK-4, CJ-4/SN, Cummins CES 20081, 20077, 20076, Volvo VDS-4, VDS-3, DHD-1, Mack EO-O Premium Plus 07, Mack EO-N Premium Plus 03, Mack EO-N Premium Plus, EO-M Plus, EO-M, Caterpillar ECF-1a, ECF-2, ECF-3, Caterpillar TO-2, Detroit Diesel 93k218, DDC Power Guard, Volvo VDS-4, Global DHD-1, Renault RLD-3, Mercedes Benz 228.3, JASO DH-2, Allison C-4, Man 3275, DDC/MTU Series 2000/4000 category 1 and 2 engine performance, ACEA E9-08, E7-04, E5, E3, mobile equipment hydraulic systems specifying Engine Oils, and automotive engines currently in use that SAE 15W-40 is specified. Fully compatible with all other synthetic & petroleum based engine oils.
Directions for use: SHAKE WELL BEFORE USE. Follow engine manufacture’s SAE weight recommendations and all other OEM specifications. On all new engines, do not add TriboDyn® Patented 15W-40 Synthetic Blend Heavy Duty Engine Oil until after 1st oil change.
DO NOT USE AS BREAK-IN OIL. NOT RECOMMENDED FOR ANY WET CLUTCH APPLICATIONS.
WARNING: Contains petroleum distillates. Avoid direct exposure. May cause skin or eye irritation. Ingestions may cause GI tract irritations or stomach discomfort. Inhalation of oil mists or heated oils may result in respiratory tract irritation. Slip hazard when spilled.
EYES - Flush with water for 15 minutes; get medical attention if eye irritation persists. SKIN - Wash with soap and water get medical attention if irritation develops. INGESTION - DO NOT INDUCE VOMITING - Rinse mouth with water; get immediate medical attention. INHALATION - Remove exposed person to fresh air if adverse effects are observed; get medical attention if symptoms occur.