TriboDyn 2-Cycle Marine Plus Oil

TriboDyn® TRI-EX2 TC-W3 Marine Plus 2-Cycle Oil Is specifically designed for maximum performance in all 2-Cycle oil applications, including direct fuel injected (DFI), electronic fuel injected (EFI) & premix lubricated engines for all makes of marine 2-cycle outboards, snowmobiles, motorcycles, lawn mowers, chain saws, golf carts, ATV’s, scooters, mopeds, and small HP engines calling for an API TC category two-cycle and/or a category FIM 4 motor oil. Is clean burning for low smoke and prevents plug fouling, is a power valve friendly lubricant, recommended where an ashless high performance oil is required & helps prevent piston ring & exhaust power valve sticking, piston skirt scoring, & carbon deposits. Improves throttle response, has superior cold temperature fluidity, -44°F pour point, for complete & easy mixing in gasoline for faster & easier starts. This patented technology is engineered to maximize fuel efficiency, minimize friction & wear, increase part & engine life, reduce operating temperature, perform under extreme pressure & heat, and provides rust and corrosion protection.

Applications: TriboDyn® TRI-EX2 TC-W3 Marine Plus 2-Cycle Oil is recommended for use in applications where TC-W®, TC-WII®, TC-W3® and JASO FB and API TC two-cycle air-cooled categories are required. It may also be used in both oil-injected engines as well as those where the oil is mixed with the fuel. The 2-Cycle Engine Oil used to make this TriboDyn® TRI-EX2 TC-W3 Marine Plus 2-Cycle Oil is licensed by National Marine Manufacturers Association (NMMA). Use in direct fuel injection (DFI), electronic fuel injection (EFI) & premix applications that require API TC oils. Oil Injection: Pour directly into tank. For premix applications, see fuel mixing table below or refer to engine manufacture's recommendation.

Directions for use: Follow all engine manufacture’s service & performance recommended specifications. It exceeds the warranty requirements for all major manufacturers including Ski-Doo®, Polaris®, Evinrude®, Mercury®, Johnson®, Yamaha®, Mariner®, Suzuki® and Arctic Cat®, as well as all other makes and models of High-Performance Outboard Engines and all two-cycle engines where a TC-W3® product is required. Is compatible with most conventional and synthetic two-stroke oils. NOT SUITABLE FOR USE WITH ALCOHOL OR NITRO-METHANE FUELS.

WARNING: This product contains crude oil and other petroleum products that may include chemicals known to the State of California to cause cancer & birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Avoid direct exposure. May cause skin or eye irritation. Ingestion may cause GI tract irritations or stomach discomfort. Inhalation of oil mist or heated oils may result in respiratory tract irritation. Slip hazard when spilled.

FIRST AID:

EYES - Flush with water for 15 minutes; get medical attention if eye irritation persists. SKIN - Wash with soap and water and get medical attention if irritation develops. INGESTION - If swallowed, DO NOT INDUCE VOMITING - Rinse mouth with water; get immediate medical attention.                                                                              INHALATION - Remove exposed people to fresh air if adverse effects are observed; get medical attention if symptoms occur.

Fuel Mixing Table (Ounces of Oil to Gallon of Gasoline in U.S. Measurement)