TriboDyn® TRI-EX2 75W-140 Full Synthetic Gear Oil is a patented ceramic lubricant with a complex mixture of gear lubricants, combined with synthetic base stocks, and a sulfur- phosphorus extreme pressure additive package with friction modifier, which provides excellent thermal and oxidative stability, as well as anti-foam, anti-rust and anti-corrosion protection and have excellent load carrying capabilities. Specifically engineered for use in Differentials, manual transmissions, worm gears, power dividers, supercharges, oil lubricated wheel bearings, Transfer Cases, pumps, and all gear boxes.
Applications: TriboDyn® TRI-EX2 75W-140 Full Synthetic Gear Oil meets or exceeds the API Service Designations: API MT-1, & API GL-5, as well as Eaton PS-386, PS-164 Rev 7, Navistar/International TMS 6816, Mack TO-A Plus, MERITOR® O-81 (Publication TP-90014), ZF Freedomline, MIL-PRF-2105E and MIL PRF 2105D, Mack GO-J & GO-H, and Proposed PG-1/PG-2 Service Designations, Scania STO 110, Meritor -076N (75W90), and Meritor-076M (75W140), and API MT-1 applications. When extreme pressure (EP) gear oils are required. In all heavy duty truck differentials - In all domestic automobile differentials and most manually shifted transmissions - In heavy duty manually shifted truck transmissions requiring API MT-1 performance - In oil lubricated wheel bearings. Fully compatible with all other synthetic & petroleum based gear oils.
Directions for use: SHAKE WELL BEFORE USING. Follow Equipment Manufacturer’s SAE weight, filling instructions, and recommended oil types and capacity. DO NOT USE IN WET CLUTCH or LIMITED SLIP APPLICATIONS.
WARNING: This product contains crude oil, and other petroleum products that may include chemicals such as toluene, and benzene, which are known to the State of California to cause cancer & birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov. Avoid direct exposure. May cause skin or eye irritation. Ingestion may cause GI tract irritations or stomach discomfort. Inhalation of oil mists or heated oils may result in respiratory tract irritation. Slip hazard when spilled.
FIRST AID: EYES - Flush with water for 15 minutes; get medical attention if eye irritation persists.
SKIN - Wash with soap and water get medical attention if irritation develops.
INGESTION - If swallowed, DO NOT INDUCE VOMITING - Rinse mouth with water; get immediate medical attention.
INHALATION - Remove exposed person to fresh air if adverse effects are observed; get medical attention if symptoms occur.
TriboDyn® TRI-EX2 Full Synthetic Gear Oils - PATENTED CERAMIC LUBRICANT
TriboDyn® TRI-EX2 Gear Oils is a patented Ceramic Lubricant that is attracted to areas of heat, & friction. As pressures increase with RPM or load, the special TRI-EX2 lubricants combined with the active “Ceramic Coating Technology” in the oil forms a self-lubricating “Ceramic Film” in high load & heat areas, providing critical protection that actively seeks out areas needing increased lubrication, and at times not simply reduce or eliminate wear, but the Ceramic film that forms, can also repair & fill in damaged surfaces. It also helps provides continuous protection by dispersing & clinging to critical areas without creating any drag, providing both start-ups, and continuous benefits while protecting against corrosion during long periods of nonuse or while in storage. This TRI-EX2 patented formula is designed to minimize friction & wear, increase gear & bearing life, reduce operating temperature, perform under extreme pressure & heat, while providing extreme shock & high load protection.
